<b id="8t235"><address id="8t235"><optgroup id="8t235"></optgroup></address></b>
<b id="8t235"><address id="8t235"></address></b><u id="8t235"><small id="8t235"></small></u>

<u id="8t235"><sub id="8t235"></sub></u>

HOT LINE: +86-510-80628100
2019-05-15 MetalForm China 2019 (Shanghai Show) 2017-07-11 BICES 2017 No. 14 China construction machinery exhibition

Technical Article

Hydraulic Press

Current Location: HOME > Technical Article

Selection of vertical roller material of vertical roller mill

The main performance parameters of the 5m wide and heavy plate vertical rolling mill:

The maximum rolling force is 5000KN;

The maximum rolling speed is 7.3m/s;

The size of the roll is Φ1000/900×600mm;

The main motor is 2×AC1200KW×305/720r/min, and the maximum output torque is 450KN·m;

 

The vertical rolling mill achieves the purpose of adjusting the width of the steel plate by giving a large amount of side pressure to the steel plate. The temperature of the billet in contact with the roll is also higher. Therefore, the roll must have good thermal crack resistance, high hardness and mold resistance. Alloy cast steel or forged steel rolls with good strength and toughness should be used.

Structural characteristics of alloy cast steel rolls: alloy cast steel rolls are cast steel rolls with an alloy content greater than 0.8%. Typical materials are: 60CrMnMo, 65CrNiMo, 70Mn2Mo, 75CrMo, 75NiMo, etc. The basic structure of alloy cast steel rolls is mainly of pearlite type, containing a small amount of carbides, and the hardness ranges from HS 35 to 50. Because the matrix contains a small amount of secondary carbides, the wear resistance is greatly improved compared with carbon steel rolls. The performance characteristics of alloy cast steel rolls are high strength, good toughness, good bite resistance, thermal crack resistance and impact resistance.

The material of the vertical roll selected for the 5m wide and heavy plate vertical rolling mill is: semi-steel.

Specification and material of vertical roll

name

Material

Roll specification (mm)

Grade

Weight (KG)

Vertical roller

Semi-steel

Ф11501000/900X600

ZuB165CrNiMo

8854 (drawing weight)

 

The chemical composition of the vertical roller:%

name

Material

Grade

chemical composition

C

Si

Mn

P

S

Ni

Cr

Mo

Vertical roller

Semi-steel

ZuB165CrNiMo

1.551.75

0.300.60

0.701.10

0.035

0.030

0.601.50

1.001.50

0.200.80

return
| TIME: 2023.01.09    VIEW:
亚洲第一精品无码毛片_国产都是精品99re66_久这里视频在线96_极品国产AV网站
<b id="8t235"><address id="8t235"><optgroup id="8t235"></optgroup></address></b>
<b id="8t235"><address id="8t235"></address></b><u id="8t235"><small id="8t235"></small></u>

<u id="8t235"><sub id="8t235"></sub></u>